Home
Service
Instrument Qualification Calibration
Request
Global Service Center – Request for Service Form
FOR SERVICE PRICING PLEASE CLICK
HERE ↓
All instruments sent in for service must have an assigned return authorization (RA) number & signed proof of instrument decontamination form.
Instruments received without assigned RA and signed decontamination form will be returned without service.
All calibrations are ISO 9001-2015/NIST compliant and include before and after data (ARD) where applicable and 2-day courtesy returned shipping within North America.
Customers outside of North American must provide freight collect account information to return your instrument once serviced.
Please allow 24-48 hours to receive your RA and decontamination form.
Service Selection
I have a contract:
Yes
No
Please select your Instrument or Service Type:
Please select...
MET ONE Air Calibration
HIAC Liquid Calibration
ANATEL TOC Calibration
Repair All Products
MET ONE Calibration Options
Please select...
A - CAL | [$1,975] 2100 - 2200 - 237H - 3411
B - CAL | [$1,550] 3413 – 3415 – 3423 – 3425 – 3445
C - CAL | [$1,410] 237 A/B – 2400/2408 – 3313/3315 – R5700/R5800/R5900 - HHPC
C1 - CAL | [$1,410] HHPC+ series and 6000/7000 series
D - CAL | [$1,300] 227 A/B – 228 – 229 – R4700 – R4800 – R4900
E - CAL | [$3,295] 3413+ • 3415+ • 3423+ • 3425+ • 3445+ (Includes ISO-21501-4 calibration)
Probe CAL | [$765] Relative Humidity and Temperature Probes
Add PROBE CAL | [$765] Relative Humidity and Temperature probes
Add ISO CAL | [$640] FULL ISO 21501-4 CALIBRATION*
*Full ISO 21501-4 calibration includes counting efficiency & resolution. Charge shown is in addition to primary calibration selection. Available on MET ONE models: 3413, 3415, 3423, 3425, 3445 series.
Add ISO CAL | [$640] FULL ISO 21501-4 CALIBRATION*
*Full ISO 21501-4 calibration includes counting efficiency & resolution. Charge shown is in addition to primary calibration selection. Available on MET ONE models:
6000/7000 series
.
Add ISO CAL | [$640] Add ISO 17025 CALIBRATION*
Probe Serial Number
HIAC Calibration Options
Please select...
PSL Water Calibration: [$2,075] All HRLD Sensors (includes data)
PSL Water Calibration: [$2,120] MC-05, MC-100 (includes data)
MTD Oil Calibration: [$2,365] HRLD 100, 150 & 600 (as received data included with 8011+ systems only)
ULTRAPURE: [$3,130] UP-100
ROC Verification [$750]
PODS or PODS+ [$2,365]
GLYCOUNT Portable: [$2,620] Glycol Fluid Calibration
Add ISO 17025 calibration [$640]
Flow Rate
*As-Received Data is only available on HIAC Liquid PSL, PODS & 8011+ equipment.
Anatel TOC Calibration Options
Please select...
Calibration [$5,240] (battery, factory calibration, lamp & filter) | Models: A1000, A643, TOC600, PAT700
Calibration [$4,500] (factory calibration only) | Models: A1000, A643, TOC600, PAT700
System Suitability Test [$1,785] | Models: A1000, A643, TOC600, PAT700
As Received Data [$615] | Models: A1000, A643, TOC600, PAT700
Calibration Resistor [$360]
EVALUATION FEE FOR REPAIR - ALL PRODUCTS – [$630]
A deposit is required to reserve an evaluation. Once evaluation is complete, an estimate of actual repair costs will be emailed for approval. Approved estimates will require submission of PO or credit card. If repair estimate is rejected, the evaluation fee will be invoiced and the instrument returned as is. Services are invoiced after the maintenance is complete and the instrument has been returned.
Please provide details of problem and any other related information
Instrument Serial Number
Additional Information (model, part number, Beckman system ID, contract number, etc.)
Add Additional Instrument to Request
Please select your Instrument or Service Type:
Please select...
MET ONE Air Calibration
HIAC Liquid Calibration
ANATEL TOC Calibration
Repair All Products
MET ONE Calibration Options
Please select...
A - CAL | [$1,975] 2100 - 2200 - 237H - 3411
B - CAL | [$1,550] 3413 – 3415 – 3423 – 3425 – 3445
C - CAL | [$1,410] 237 A/B – 2400/2408 – 3313/3315 – R5700/R5800/R5900 - HHPC
C1 - CAL | [$1,410] HHPC+ series and 6000/7000 series
D - CAL | [$1,300] 227 A/B – 228 – 229 – R4700 – R4800 – R4900
E - CAL | [$3,295] 3413+ • 3415+ • 3423+ • 3425+ • 3445+ (Includes ISO-21501-4 calibration)
Probe CAL | [$765] Relative Humidity and Temperature Probes
Add PROBE CAL | [$765] Relative Humidity and Temperature probes
Add ISO CAL | [$640] FULL ISO 21501-4 CALIBRATION*
*Full ISO 21501-4 calibration includes counting efficiency & resolution. Charge shown is in addition to primary calibration selection. Available on MET ONE models: 3413, 3415, 3423, 3425, 3445 series.
Add ISO CAL | [$640] FULL ISO 21501-4 CALIBRATION*
*Full ISO 21501-4 calibration includes counting efficiency & resolution. Charge shown is in addition to primary calibration selection. Available on MET ONE models:
6000/7000 series.
Add ISO CAL | [$640] Add ISO 17025 CALIBRATION*
Probe Serial Number
HIAC Calibration Options
Please select...
PSL Water Calibration: [$2,075] All HRLD Sensors (includes data)
PSL Water Calibration: [$2,120] MC-05, MC-100 (includes data)
MTD Oil Calibration: [$2,365] HRLD 100, 150 & 600 (as received data included with 8011+ systems only)
ULTRAPURE: [$3,130] UP-100
ROC Verification [$750]
PODS or PODS+ [$2,365]
GLYCOUNT Portable: [$2,620] Glycol Fluid Calibration
Add ISO 17025 calibration [$640]
Flow Rate
*As-Received Data is only available on HIAC Liquid PSL, PODS & 8011+ equipment.
Anatel TOC Calibration Options
Please select...
Calibration [$5,240] (battery, factory calibration, lamp & filter) | Models: A1000, A643, TOC600, PAT700
Calibration [$4,500] (factory calibration only) | Models: A1000, A643, TOC600, PAT700
System Suitability Test [$1,785] | Models: A1000, A643, TOC600, PAT700
As Received Data [$615] | Models: A1000, A643, TOC600, PAT700
Calibration Resistor [$360]
EVALUATION FEE FOR REPAIR - ALL PRODUCTS – [$630]
A deposit is required to reserve an evaluation. Once evaluation is complete, an estimate of actual repair costs will be emailed for approval. Approved estimates will require submission of PO or credit card. If repair estimate is rejected, the evaluation fee will be invoiced and the instrument returned as is. Services are invoiced after the maintenance is complete and the instrument has been returned.
Please provide details of problem and any other related information
Instrument Serial Number
Additional Information (model, part number, Beckman system ID, contract number, etc.)
Contact Information
First Name
Last Name
Company/Institution
Work Phone
Work Email
Bill To Address 1
Bill To Address 2
Bill To City
Postal/Zip Code
Bill To Country/Region
Please select...
Canada
United States
State
Please select...
Alabama
Alaska
Arizona
Arkansas
California
Colorado
Connecticut
Delaware
District Of Columbia
Florida
Georgia
Hawaii
Idaho
Illinois
Indiana
Iowa
Kansas
Kentucky
Louisiana
Maine
Maryland
Massachusetts
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
Nevada
New Hampshire
New Jersey
New Mexico
New York
North Carolina
North Dakota
Ohio
Oklahoma
Oregon
Pennsylvania
Rhode Island
South Carolina
South Dakota
Tennessee
Texas
Utah
Vermont
Virginia
Washington
West Virginia
Wisconsin
Wyoming
Puerto Rico
Virgin Island
Northern Mariana Islands
Guam
American Samoa
Palau
Provinces
Please select...
Alberta
British Columbia
Manitoba
New Brunswick
Newfoundland
Northwest Territories
Nova Scotia
Nunavut
Ontario
Prince Edward Island
Quebec
Saskatchewan
Yukon
Return Shipping Detail
Will the calibrated instrument be return-shipped to the same address or to a different location?
Same address
Return calibrated device to a different location
Return Shipping Address
First Name
Last Name
Company/Institution
Address Line 1
Address Line 2
City
Postal/Zip Code
Country/Region
Please select...
Canada
United States
State
Please select...
Alabama
Alaska
Arizona
Arkansas
California
Colorado
Connecticut
Delaware
District Of Columbia
Florida
Georgia
Hawaii
Idaho
Illinois
Indiana
Iowa
Kansas
Kentucky
Louisiana
Maine
Maryland
Massachusetts
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
Nevada
New Hampshire
New Jersey
New Mexico
New York
North Carolina
North Dakota
Ohio
Oklahoma
Oregon
Pennsylvania
Rhode Island
South Carolina
South Dakota
Tennessee
Texas
Utah
Vermont
Virginia
Washington
West Virginia
Wisconsin
Wyoming
Puerto Rico
Virgin Island
Northern Mariana Islands
Guam
American Samoa
Palau
Provinces
Please select...
Alberta
British Columbia
Manitoba
New Brunswick
Newfoundland
Northwest Territories
Nova Scotia
Nunavut
Ontario
Prince Edward Island
Quebec
Saskatchewan
Yukon
Service Priority Selections
Select your service and return transit priority.
Standard (7-business days & 2-day courtesy return shipping) - Included
Priority: Next on bench. United States customers receive 1-day return shipping. International customers, standard return shipping. [$1,250]
*Priority service is available for calibration service or evaluation of repair only.
Contract Number
* Add total of services requested and enter that amount here. A Net 30 PO or credit card payment is required to provide RA and shipping decontamination form. Attach your PO in the field below.
For credit card payments - to ensure the privacy and security of our customers information, a secure link via Snap Pay will be provided for credit card entry. Please do not email credit card information.
Will you be paying with credit card?
Yes
No
If you have a NET-30 purchase order, please upload here.
Upload Additional Document/File to Request
To view service options and pricing click
here
.